| SERVICES WE PERFORM | |
| PORTING HEADS | PRICES |
 Stage
1 - Valve Job, Blend Seats and chambers |
$750.00 |
| Stage
2 - Full CNC of ports and Stage 1 |
$1,250.00 |
| Stage
3 - Big Valve, Hand Blending and Stage 2 |
$1,650.00 |
| PORTING INTAKE | |
| Stage
1 - Port Match |
$200.00 |
| Stage
2 - Port Match and Runner work |
$1,000.00 |
| Stage
3 - Full Porting of intake manifold |
$1,750.00 |
| CNC
valve job |
$250.00 |
| Decking
up to .020 |
$85.00 |
| Decking
over .020 |
$100.00 |
| Assemble
and set-up of cylinder heads |
$125.00 |
| Turning
valves down to desired size |
$50.00 |
| Cutting
guides for teflon seals |
$25.00 |
| Disassemble
and clean |
$75.00 |
| Flow
Test (1 intake / 1 exhaust) |
$50.00 |
| CC
Port |
$30.00 |
| CC
Chamber |
$30.00 |
| Machine
for bigger springs |
$45.00 |
| Machine
intake for NOS nozzle per 8 |
$150.00 |
| Machine
intake for NOS Annular nozzle per 8 |
$250.00 |
| Make
Valley Tray |
$195.00 |
| Valve
guide R&R |
$106.00 |
| Valve
seat R&R |
$150.00 |
| Convert
Carb manifold to EFI including rails |
$450.00 |
| Machine
Compression releases (H/D only) |
$125.00 |
| Check
Valve-to-Valve Clearance (H/D only) |
$30.00 |
| R&R
Valve seat (per seat H/D only) |
$20.00 |
| R&R
Valve guide (per guide H/D only) |
$20.00 |
| Helicoil
holes 1st hole $20, $10 per hole after first |
|
|
|
|
|